Overclocking your CPU can be a great way to get more performance out of your computer. However, if you overclock your CPU too much, you can run into problems. If you’re having trouble with your overclock, or if you just want to return to stock speeds, here’s how to un-overclock your CPU.
- Power down your computer and unplug it from the power source
- Disconnect any peripheral devices that are connected to your computer
- Remove the CPU cooler and carefully remove the CPU from its socket on the motherboard
- Find the BIOS jumpers or switches on your motherboard and set them back to their default settings
- This will reset your BIOS and undo any overclocking that you have done
- Replace the CPU in its socket on the motherboard and reattach the CPU cooler
- Reconnect any peripheral devices that you disconnected in step 2 and then plug your computer back into its power source
- Power on your computer and enter the BIOS again to check that all of your settings have been reset to their defaults
Credit: www.pcworld.com
Can Overclocking Ruin Your CPU?
Overclocking is the process of making a computer or processor run faster than the speed it was designed for. It is done by increasing the clock rate which causes the processor to execute more instructions per second. Overclocking can be used to improve the performance of gaming computers, video editing workstations and other types of PCs.
However, overclocking can also lead to hardware damage if done incorrectly. If a component is overclocked too much, it can overheat and break. This is why it’s important to use caution when overclocking and to know your limits.
While overclocking can improve performance, it isn’t without risks. So, if you do decide to overclock your CPU, make sure you know what you’re doing and proceed with caution.
How Do I Turn off Auto Overclocking?
If you’re looking to disable automatic overclocking on your PC, there are a few ways to go about it. Here’s a quick guide on how to turn off auto overclocking in the BIOS and through software.
First, let’s hit the basics.
Overclocking is the process of pushing a computer component beyond its stock speed in order to get better performance out of it. It’s a popular practice among PC gamers and enthusiasts, but it can also be handy for general users who want their system to run a little faster.
Most modern CPUs and GPUs have some sort of built-in overclocking feature that can be enabled or disabled with a simple switch in the BIOS.
This feature is typically called “automatic overclocking” or “CPU boosting.” If your CPU or GPU has this feature, you’ll need to head into the BIOS and disable it before you start tinkering with any other settings.
Once you’re in the BIOS, look for an option that says something like “CPU Boost,” “Auto Overclock,” or “Performance Enhance.”
These options are usually found under the “Advanced” tab or something similar. Disable whichever setting is enabled, save your changes, and restart your PC.
Now that automatic overclocking is turned off in the BIOS, you can begin adjusting clock speeds manually through software tools like Intel XTU or AMD Ryzen Master.
Keep in mind that while manual overclocking is safe when done properly, it carries more risk than letting your CPU or GPU overclock itself automatically. So if you’re not comfortable with tweaking these settings yourself, it’s best to leave things at their default values.
Does Resetting PC Remove Overclock?
Overclocking is the process of forcing a computer component to run at a higher speed than it was designed for. This can be done by adjusting the frequency or voltage supplied to the component. Resetting a PC will not remove any overclocks that have been applied.
If you want to remove an overclock, you will need to adjust the settings back to their default values.
How Do I Clear Overclocking?
Overclocking is the process of pushing a computer’s components beyond their default speeds in order to extract more performance. It can be a very effective way to eke out extra frames per second in games, or shave off a few seconds from rendering times. However, it also comes with increased risks of instability and hardware damage, so it’s not something that everyone should do.
If you want to clear your overclocks for any reason, there are a few different ways to go about it. The simplest method is to just reset your BIOS (Basic Input/Output System) to its default settings. This will undo any changes you’ve made in the BIOS and restore the default speeds for all your components.
To do this, enter your BIOS menu and look for the “Load Defaults” or “Reset BIOS” option. Once you select it, confirm the action and reboot your PC; everything should now be running at stock speeds again.
Alternatively, if you only want to remove the overclock from one specific component, you can usually find an option to do that in the BIOS as well.
For example, if you have an Intel CPU with an unlocked multiplier, you can go into the “CPU Configuration” menu and set the multiplier back to its default value. Once you save your changes and reboot, that particular component will be running at stock speeds while everything else remains overclocked.
Of course, sometimes things can go wrong even when clearing overclocks correctly; if your PC becomes unbootable after resetting the BIOS or removing an overclock, don’t panic!
Just head into the BIOS once again and look for the “Clear CMOS” option (which may also be labelled as “Reset RTC” or something similar). Selecting this option will effectively reset everything back to how it was when you first powered on your PC – meaning all those pesky overclocks will be gone too!
How to fix your computer after a really bad CPU overclock
How to Un Overclock GPU
If you’ve overclocked your GPU and want to return it to its default settings, there are a few things you need to do. First, open up your graphics control panel and restore the default clock speeds. Next, go into your BIOS and reset any overclocking settings that you may have changed.
Finally, reboot your PC and check that everything is back to normal.
If you’re not sure how to access your BIOS or graphics control panel, consult your motherboard or graphics card manual for more information. Once you’ve restored everything to its default state, you should be able to safely remove any extra cooling gear that you were using for overclocking.
Conclusion
If you’ve overclocked your CPU and now want to return it to its default speed, there are a few different ways you can do this. The most straightforward way is to simply reset your BIOS settings to their defaults. Alternatively, if you’re using an aftermarket cooling solution like a water cooler or air cooler, you may be able to remove it and then boot into your computer’s UEFI/BIOS menu and select the “Restore Defaults” option.
Finally, if none of those options work, you can always just reinstall your CPU’s stock heatsink and fan assembly.